Impeller Packing Systems

Impeller packers are ideally suited for powdered products, including talc, cement, gypsum, lime, sand and other products. A horizontally mounted, motor-driven rotary impeller fills the bags. Packing, weighing and bag discharge functions are fully automatic.

Each system comes with an electronic weighing system, a separate controls box, and a display screen with key pad to change bag size, weights or other bagging parameters. Packers are designed to be fed by an automatic bag placer and can be configured as single units or set-up four in-line.

Features	Technical Specifications
Suitable for most powdered products	Maximum weight handled:120 lbs.
Handles paper or plastic valve bags	Product feeding system: Motor driven impeller
Completely automatic operation	Power required: 440V – 60Hz& – 3Ph 80 PSI compressed air Compressed air consumption, 2 – 3 CFM
Integral electronic weighing system	Output per spout: 3 – 5 bags/minute depending on product and bag size
Designed to work with an automatic bag placer
Separate control box

Additional Information
Download Spec Sheet (116KB PDF)

Request a Quote
To request a quote on the following products, download and print the appropriate technical data sheet below, fill out the requested information and fax back to 616.942.8825.
Download PDF (103.5KB PDF)

Nozzle with bag detection device.

Product is packed into bags by horizontally-
mounted, motor-driven impellers.

Packer can be quickly reprogrammed to handle multiple bag sizes and varying weights.

Packers can be quickly
reprogrammed to handle
multiple bag sizes and varying
weights.